Philips Onis 2 - Manual (Page 13)

Using your Onis 9
Answering a call
When someone calls you, the base station and the handset ring, the t symbol
blinks on the handset display and the green light on the base station flashes.
Press the t key on the handset.
The t symbol stops blinking on the handset. The green light on the base
station blinks regularly to indicate that a call is in progress.
You can also press
H . The handset loudspeaker is activated and you can
take the call.
To hang up, press t or replace the handset on the base station.
The call duration is displayed for 4 seconds.
Redialling the last number
Direct redial
Press the t key on the handset. Wait for the dial tone.
Press the B key on the handset.
The last number called is shown on the display and dialled automatically.
Redial with number correction
Press the B key on the handset.
The last number called is shown on the display. You can use the + key to
correct the number.
Press the t key on the handset.
Adjusting the handset earpiece volume
You can adjust the earpiece sound volume during a call by pressing + or - .
You can choose from 3 possible sound levels. The sound level you have selected
will be set for future calls.
Using the loudspeaker
Your handset is fitted with a loudspeaker so that other people with you can listen to
the conversation.
During a call, press H .
The sound is amplified through the loudspeaker at the back of the handset.
Adjust the volume of the loudspeaker when it is on, using + or - .
To turn off the loudspeaker, press H again.
1
2
1
2
1
2
1
2
3