Philips FW-D596 - Manual (Page 43)

43
English
Other Functions
Switching on/off
Switching the system on
In standby/demonstration mode
● Press STANDBY ON.
➜ The system will go back to its previous status.
● Press DISC, TUNER, AUX, TAPE (or DISC,
TUNER, AUX/TV on the remote control).
➜ The system will switch to the selected source.
In eco power standby mode
● Press ECO POWER.
➜ The system will switch to last selected source.
● Press DISC, TUNER, AUX/TV on the remote
control to power on the system.
Switching the system to standby mode
In demonstration mode
● Press and hold DEMO STOP 7 on the system.
In any other source mode (except Econ
Power Standby mode)
● Press STANDBY ON (or 2 on the remote
control).
➜ The time will appear on the display when the
system is in Standby mode.
Switching to eco power standby mode
● Press ECO POWER to ECO POWER mode.
➜ “ECO POWER” will be shown for 3 seconds
and scroll from left to right on the display.
➜ The system will go to standby mode, and
then to ECO Power mode in 5 seconds.
Power saving automatic standby
As a power-saving feature, the system will
automatically switch to Standby mode if you
don’t press any button within 30 minutes in the
stop mode.
Dimming the display
● Press DIM repeatedly to select different levels
of brightness for the display: HIGH, MID or
LOW.
Vocal
This function allows you to fade out the original
vocal from a karaoke. You can use it to select
different audio modes.
For DVD karaoke discs:
AUDIO 1 VOCAL, AUDIO 2 VOCAL.
For VCD karaoke discs:
LEFT VOCAL, RIGHT VOCAL or STEREO
● Press VOCAL.
➜ The Vocal indicator will flash until you rotate
the JOG to select VOCAL ON or OFF.
Note:
– “
PLEASE INSERT MIC” is displayed on your
TV screen if you have not connected the
microphone to the system in VOCAL ON mode.