Philips FW-D596 - Manual (Page 33)

33
English
Changing the password
You can change the four-digit code used as
Password.
1,5
2,3
4
1 In disc mode, press SYSTEM MENU.
2 Select icon and press 4.
3 Press 1 / 2 / 3 / 4 on the remote control to
navigate in the menu.
➜ Move to icon and press 2.
➜ Move to “PASSWORD” and press 2.
ENTER CODE
ENTER ORIGINA PASSWORD
4 Use the numeric keys (0-9) to enter your
four-digit code.
➜ The password supplied by default is 1234.
➜ If you forget the four-digit code, press 9 four
times, the system will change back to the default
password.
● Go to “Password” and enter your new code.
Then, enter the same code again to confirm.
ENTER CODE
ENTER ORIGINA PASSWORD
5 Press SYSTEM MENU again to cancel the
menu.
DVD Menu Operations