About this guide, Audience, Structure – Patton electronic Model 3088/I User Manual
Page 10
10
About this guide
This guide describes installing and operating the Patton Electronics Model 3088/I G.SHDSL
RocketLink-G™ NTU.
Audience
This guide is intended for the following users:
•
Operators
•
Installers
•
Maintenance technicians
Structure
This guide contains the following chapters and appendices:
•
on page 14 provides information about NTU features and capabilities
•
on page 16 contains an overview describing NTU operation and applications
•
on page 23 provides hardware installation procedures
•
on page 29 provides quick-start procedures for configuring the RocketLink-G NTU
•
on page 33 describes how to configure the RocketLink-G NTU, save the configuration, reset the
NTU to the factory default condition, and upgrade the system software
•
on page 40 describes the system tools that can be used to diagnose problems with the NTU
•
on page 42 contains information on contacting Patton technical support for assistance
•
on page 45 contains compliance information for the RocketLink-G NTU
•
on page 49 contains specifications for the NTU
•
on page 54 provides cable recommendations
•
on page 56 describes the NTU’s ports and pin-outs
•
on page 58 lists the factory configuration settings for RocketLink-G NTU
•
on page 60 provides license information that describes acceptable usage of the software pro-
vided with the RocketLink-G NTU
For best results, read the contents of this guide before you install the NTU.