Projection display operation, Basic operation – Panasonic PT 40LC12 User Manual
Page 29
29
Basic Operation
Projection display operation
2
1
H
C
C
B
A
L
A
M
R
O
N
O
E
R
E
T
S
P
A
S
O
N
O
M
Aspect types
(P. 30)
Receivable
broadcast types
(P. 35)
Channel
Channel caption
(P. 52)
TV status display
Using the number keys
Example 1: To select channel 125, first press the 1 key, then 2, then 5.
When selecting CABLE channels 100 to 125 with the number keys, first press the 1 key,
and then enter the remaining two digits.
Press the RECALL button, except when the MENU screen is displayed, to display current
TV status information.
Example 2: To select channel 12, press the 1 key, then 2. Channel 12 appears momentarily.
Example 3: To select channel 8, press the 8 key. Channel 8 appears momentarily.
FREEZE
Invalid operation notice feature
If an invalid operation is attempted, the mark shown right is
displayed.
125 or 69
CABLE
CH01
CH125
LINE 1
LINE 2
LINE 3
RGB
COMPONENT 2
COMPONENT 1
TV
Projection display Channel up/down
buttons can also be used to select an
outside input as shown right.
* No input mode is displayed for terminals with
no equipment connected.
*
*
*
*
*
Using projection display Channel up/down buttons to select input mode
Auto shut off
To extend lamp life, if there is no signal to the set’s tuner for 5 minutes, the lamp will shut off automatically.