Panasonic PT 40LC12 - Manual (Page 13)

13
Getting Started
Cable Connection
Use this configuration when connecting the projection display to a cable TV system.
Notes:
• Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A cable
converter box is required for proper reception. Check with your local Cable company for its compatibility require-
ments.
• For reception of cable channels (01 - 125) connect the cable supplied by your local cable company.
Antenna Mode must be set to CABLE. (P. 24)
Installation
CABLE BOX
INPUT OUTPUT TERMINAL ON
THE BACK OF
THE CABLE BOX
In from cable
Connect the cable from the antenna
or cable system to the VHF/UHF
terminal on the back of the
Projection display. .
In from cable
Or