10 adjusting the picture orientation, Rear projection, Ceiling mode – Planar PD7170 User Manual
Page 47: Adjusting the picture orientation, Rear projection ceiling mode, Prel imina ry
Planar PD7170 Installation/Operation Manual
33
PREL
IMINA
RY
3.10
Adjusting the Picture
Orientation
If the PD7170 is installed behind the screen, you must change the picture
orientation to match the installation method. To do this, press MENU on the
remote control. Then, select System from the Main Menu.
Rear Projection
If the projector is used in a rear-projection application (see Figure 3-6), press
repeatedly to select Rear Projection from the System Menu. Press or to set it
to On.
Ceiling Mode
If the projector is ceiling-mounted, the PD7170 automatically inverts the image.
If this automatic inversion is not desired, select Ceiling Mode from the System
Menu and set it to Off.