Planar PD7170 - Manual (Page 29)

Installation
Planar PD7170 Installation/Operation Manual 15
PREL
IMINA
RY
3.2
Quick Setup
Table 3-1 gives a quick overview of the PD7170 installation process. The sections
following this one provide detailed instructions.
Installation should be performed by a qualified custom
video installation specialist.
Table 3-1. Installation Overview
Step Procedure
For Details, Refer to
page...
1 Choose a location for the projector 16
2 Install the projection lens (if standard lens will not be
used)
21
3 Mount the projector 23
4 Connect signal sources to the PD7170 25
5 Connect external controller to RS-232 port and/or IR
repeater system (optional) 29
6 Connect 12-volt trigger output to retractable screen
or other, +12V trigger-activated equipment
(optional)
30
7 Apply power to the projector 31
8 Primary lens adjustments: projected image size
(zoom), position (shift) and focus 19, 31
9 Change the OSD Language (optional) 32
10 For rear-screen and/or ceiling-mount installations,
select the proper picture orientation
33
11 Projector calibration: adjust the following for each
input; save settings when finished:
Aspect ratio
Brightness
Contrast
Color level
Tint
Input position
39
Note