Audio- and video equipment keys – Philips 50PF9967D/10 User Manual
Page 36
36
This system remote control operates the following Philips equipment:TV,
VCR, DVD, DVD/R, SAT (RC5/RC6), AMP (+TUNER), CD, CD/R.
Press the
Select
key to operate any of the equipment indicated in the
display
(
AUX
= CD, CDR,VCR;
DVD/R
= DVD,
SAT
= SAT (RC5). Another device
can be selected by pressing
Select
repeatedly within 2 seconds.The led will
blink slowly to indicate the device.
Press one of the keys on the remote control to operate the peripheral
equipment.
To return to TV mode press
Select
while the led is blinking.
When no action is taken within 60 seconds, the remote goes back to
TV
mode.
When you do not want the remote to go back to TV mode, and to stay in
the mode selected, proceed as follows:
Select the desired mode with the
Select
key.Wait until no LED is lit. Press
the
Select
key again simultaneously with the
OK
key for at least 2 seconds.
The remote will not go back to TV mode from now on and will remain in
the mode selected.
To go back to the default setting of the remote (TV mode) repeat what is
explained above, selecting the TV mode.
Note: When the
Select
key is pressed and held for more than 2 seconds, the
RC5/RC6 system select command is transmitted.
MODE
ON/OFF
Ambilight
+
-
+
-
DVD/R SAT TV VCR AUX
MENU
MENU
1
2
3
4
5
6
7
8
9
0
Ò
®
‡
π
º
†
®
®
®
®
OPTIONS
MHEG
CANCEL
Select
DIGITAL
b
q
h
b
æ
j
i
0
A/D
TV
DIGITAL
OK
B
v
¬
P
V
B
to switch to standby
ºæ for pause (
VCR
,
DVD
,
CD)
RDS news/TA (
AMP
);
to shuffle play (
CD/R
)
®
for record
Ò
for rewind (
VCR
,
CD
);
search down (
DVD
,
AMP
)
‡
for stop
π
for play
†
for fast forward (
VCR
,
CD
);
search up (
DVD
,
AMP
)
b
RDS display (
AMP
);
to select your choice of
subtitle language (
DVD
);
i
display information
MENU TV
to switch the menu
on or off
- P +
for chapter, channel, track
selection
0 to 9 digit entry
0
tape index (
VCR
),
select a DVD title/chapter,
select a frequency (
AMP
)
cursor up/down
to select the next or the
previous disc (
CD)
cursor left/right
to select the previous or
following track (
CD
)
search up/down (
AMP
)
Additionally the
DVD/R
,
SAT
and
AUX
indicator
can be programmed to operate the DVD-R, DVD +
receiver, DVD-R + receiver, SAT (RC6), CD-R and
VCR instead.
&
Select
TV
with the
Select
key.
é
To program
• DVD-R
, press the
OK
key + digit 2;
•
SAT (RC6)
, press the
OK
key + digit 4;
•
CD-R
, press the
OK
key + digit 6;
•
DVD
+
receiver
, press the
OK
key + digit 7;
•
DVD-R
+ receiver
, press the
OK
key + digit 8;
•
VCR
, press the
OK
key + digit 9.
“
Select the corresponding
DVD/R
,
SAT
,
AUX
indicator.The remote control will operate your
DVD-R, DVD or DVD-R in combination with a
receiver (
DVD/R
), SAT (RC6) (
SAT
), CD-R or
VCR (
AUX
).
Note: To return to the modes programmed in the
factory, either remove the batteries for a few
minutes, or press the
OK
key + digit 1 (DVD
mode); or + digit 3 (SAT-RC5) or + digit 5 (CD
mode).
Audio- and video equipment keys
24571.1 en.qxd 31-08-2005 11:59 Pagina 36