Philips 50PF9967D/10 - Manual (Page 12)

12
This menu allows you to setup the access
restrictions of the digital channels. & From the digital mode, press the DIGITAL
MENU key to display the Setup menu.
é Use the cursor down to select Access
restriction and press the cursor right.
“ Press the cursor right to enter into the Set
pin code protection menu.
‘ Use the cursor left/right to set to On and
press the OK key to exit.
You can then access the other adjustments:
Warning : the moment you use any kind of access
restriction, you need to fill in the pin code when you
schedule a program for recording.
• Maturity rating : select your preferred rating
to lock the channel.
Maturity rating will only block certain programmes
if the broadcaster provides data with the
programme.
• TV channels : select the TV channel you
want to lock and press the OK key.
• Radio station : select the radio station you
want to lock and press the OK key.
• Change pin code : press the cursor right to
enter in the menu. Follow the on-screen
instruction to change your access code.
The default pin code is 1234. If you have
forgotten your personal code, you can reset to the
default pin code (1234) by enter the universal
code 0711.
( Press the DIGITAL MENU key to exit the
menu.
The TV is equipped with a Common Interface
(CI) slot (see p. 34). A CI module can enable
additional services, for example Pay TV. The
Access Restrictions menu will show the CI
Access Restrictions when a CI module is
installed. The CI module is responsible for the
messages and texts on screen. In case of
failure or strange behaviour, you must call
your CI service provider.
Access restrictions
Setup
Access restrictions
Switch pin code protections “on” or “off”
Set pin code protection
Maturity rating
TV channels
Radio stations
Change pin code
Close
On Off
24571.1 en.qxd 31-08-2005 11:59 Pagina 12