Common interface connect extra subwoofer – Philips 50PF9967D/10 User Manual
Page 34
34
To enhance the sound reproduction of your TV you can connect an externally powered subwoofer
(between 20 and 250 Hz).
&
Connect the audio cable of the external subwoofer to the
SUBWOOFER
socket at the rear of your
TV.
é
Select
Subwoofer
in the Setup, General menu, p. 20.
“
Adjust the frequency of the external subwoofer to 100-120 Hz (according to your personal
preference) if present on the subwoofer.
‘
Adjust the volume level of the external subwoofer, presumed this control is present on the subwoofer.
See also the instruction manual of the external subwoofer.
SUBWOOFER
A common interface is available to connect a CAM (Conditional Access Module) and a SmartCard.
Please contact your service provider to get more information about these modules.
Note: The television should always be switched off before any module is inserted in the common interface slot.
COMMON INTERFACE
Common Interface
Connect extra subwoofer
24571.1 en.qxd 31-08-2005 11:59 Pagina 34