Philips 50PF9967D/10 - Manual (Page 32)

32
DIGITAL
AUDIO
OUT
AUDIO
OUT
CENTRE
IN
3
2
& Connect the audio cable to the MultiChannel Surround receiver and to AUDIO OUT L and R at the
bottom of your TV 1.
é If you want the loudspeakers of your TV to act as centre speaker, also connect an audiocable to the
multi channel Surround receiver and to the
CENTRE IN at the bottom of your TV 2.
“ Select Centre Input On in the Source menu. See p. 21.
Digital sound
& Connect your Digital MultiChannel Surround receiver also to the DIGITAL AUDIO OUT connector
3 to have digital sound being reproduced.
é Digital sound will be reproduced if the selected digital channel is broadcasted with AC3 sound
transmission.
“ Select AC3 in the digital Setup menu, Preferences, Digital Audio Output. See p. 11.
‘ Select Digital Audio input on your digital MultiChannel Surround receiver.
Warning:
If no
AC3 signal is transmitted, there will be no sound on the digital audio out output.
Note: No sound will be heard when a TV channel or external source is locked via the Features/Child lock menu
(see p. 26).
MultiChannel Surround receiver
24571.1 en.qxd 31-08-2005 11:59 Pagina 32