Philips SFF 6135D - Manual (Page 65)

Telephone Lines and Additional Devices · Connecting Additional Devices 65
EN
2 A message appears on the display as soon as the
device is configured as base unit. Bring the cordless
telephone into registration mode.
3 Press
C, 521 and OK on the device.
Registering Cordless Telephone
The cordless telephone is automatically registered. This
process can take a few minutes. Then the number with
which it is registered with the device appears on the dis-
play of the cordless telephone.
Registering other Cordless Telephones
Display Date and Time
Deregistering Cordless
Telephone
Deregistering Cordless Telephone
You can deregister a cordless telephone either from the
device or from the cordless telephone. Follow the
instructions in the operating instructions of the cordless
telephone.
1 Press
C, 522 and OK.
2 Using
[ to select which cordless telephone you are
would like to de-register.
3 Confirm with
OK. The device disconnects from the
cordless telephone.
Looking for Cordless Telephone
Looking for Cordless Telephone
This function helps you in locating cordless telephones,
which you have misplaced. For this purpose the cord-
less telephones must be registered with the device and
must be within its range.
1 Press
C, 523 and OK.
2 All cordless telephones registered with the device
ring for approx. one minute. You can end the search
function by pressing
j on the device or pressing the
button to hang up on the cordless telephone.
Connecting Additional
Devices
Additional Devices
You can operate additional devices on a telephone line,
such as cordless telephones, answering machines,
modems or charge counters.
Connection to the Device
Connection to the Device
You can connect additional devices directly to your
device. Insert the telephone cable of the additional
device into the
AUX./Ò socket (RJ-11-connection) on
the device.
Externe Geräte anschließen
Connection to the Telephone Line
Order of Connections
In order for the fax switch to function, the device must
be first in the series if multiple devices are connected to
the same telephone socket. Follow the correct order.
Connection to the First Telephone Socket
Using Additional Telephones
(Easylink)
Easylink
With the Easylink function you can control your device
with additional telephones. To use this function, addi-
tional telephones must be set to the tone dialling mode
(DTMF/MFV tones) (for this purpose see the operating
manual of your additional telephone).
Starting Fax Reception
If you pick up at an additional device and hear that you
are receiving a fax (whistling tone or silence), you can
start the fax reception by pressing
*5 on the addi-
tional telephone or pressing
o on the device.
Hang up Additional Telephone
Hang up the additional telephone when the ring tone
changes. The device has accepted the reception of the
fax message.
Notice
Registering other Cordless Telephones
You can register other cordless telephones
with your device in the same manner. If you
face any difficulties in registering, de-register
all cordless telephones, and re-register them
individually.
Notice
Display Date and Time
Date and time of the cordless telephone is
continually synchronised with the device.
Notice
Connection to the First Telephone
Socket
If you have multiple telephone sockets for the
same telephone line, the device must be con-
nected to the first telephone socket.