Philips SFF 6135D - Manual (Page 36)

36 Philips · LaserMFD 6135hfd
EN
3 Use
[ to select ID CARD COPY
.
4 Confirm with
OK.
5 The first page of the document is scanned.
6 Turn the document over when the corresponding
messages appear on the display. Place it in the same
place as the first page.
7 Confirm with
OK. The second page of the docu-
ment is scanned and the copy is created.
Configure Settings for
Second Profile
Select One Side/Both Side
Printing (Simplex/Duplex)
1 Press
C, 1061 and OK.
2 Select one-sided print (Simplex) or double-sided
print (Duplex) using
[.
3 Confirm with
OK.
Set Resolution
1 Press
C, 1063 and OK.
2 Select the desired resolution using
[:
AUTO
—Optimised adjustment for all types of docu-
ments
TEXT
—For texts with small print or drawings
QUALITY
—For documents with many details
PHOTO
—For the highest resolution
3 Confirm with
OK.
Setting the Contrast
1 Press
C, 1064 and OK.
2 Set the desired contrast using
[.
-
/
1
—Reduces the contrast / typeface appears lighter
4
(Factory settings)—Optimized adaptation for all
documents
+
/
7
—Increases the contrast / typeface appears
darker (for example, documents with faint print)
3 Confirm with
OK.
Setting the Brightness
1 Press
C, 1065 and OK.
2 Using
[, select the desired level of brightness:
-
/
1
—Reproduction is lighter
4
(Factory settings)—Optimized adaptation for all
documents
+
/
7
—Reproduction is darker
3 Confirm with
OK.
Notice
Access Function
You can also call the function by pressing
C, 16 and OK.