Philips SFF 6135D - Manual (Page 61)

Settings · Locking the Device 61
EN
Printing Multiple Copies
Printing Multiple Copies
You can apply settings to your device whereby multiple
copies of fax transmissions are printed out upon recep-
tion.
1 Press
C, 4022 and OK.
2 Enter a value from
1 to 99.
3 Confirm with
OK.
Spaltenumbruch
Locking the Device
Locking the Device
With the locking function, you can prevent unauthor-
ised persons from using your device. Only after entering
of the correct code will it be possible to access func-
tions or enter numbers. The lock will turn itself on again
after each use of the device.
Entering the PIN Code
Default Access Code
1 Press
C, 921 and OK.
2 Enter a four-digit PIN code.
3 Confirm with
OK.
4 Enter the code again for confirmation purposes.
5 Confirm with
OK.
Locking the Keyboard
Locking the Keyboard
This function locks the entire keyboard of the device.
1 Press
C, 922 and OK.
2 Enter the four-digit PIN code.
3 Confirm with
OK.
4 Use
[ to select whether you would like to turn the
function on or off.
5 Confirm with
OK.
Locking Manual Dialling
Locking Manual Dialling
This function blocks the manual dialling of telephone num-
bers. Numbers from the telephone book can be called.
Manual dialling of emergency number is not possible.
1 Press
C, 923 and OK.
2 Enter the four-digit PIN code.
3 Confirm with
OK.
4 Use
[ to select ONLY DIRECT.
.
5 Confirm with
OK.
Lock USB Storage Medium
Lock USB Storage Medium
You use this function to block access to a connected
USB storage medium.
1 Press
C, 925 and OK.
2 Enter the four-digit PIN code.
3 Confirm with
OK.
4 Use
[ to select whether you would like to turn the
function on or off.
5 Confirm with
OK.
Lock Settings
Lock Settings
This function blocks the changing of settings on your
device. The settings can be locked with a customizable
administrator pin code
Entering the PIN Code
Default Access Code
1 Press
C, 0001 and OK.
2 Enter a four-digit PIN code.
3 Confirm with
OK.
4 Enter the code again for confirmation purposes.
5 Confirm with
OK.
Activate and deactivate functions
1 Press
C, 0002 and OK.
2 Enter the four-digit PIN code.
3 Confirm with
OK.
4 Use
[ to select whether you would like to turn the
function on or off.
5 Confirm with
OK.
Notice
Default Access Code
The function is switched off with the factory-
installed access code (
0000
). Change the
access code to switch on the function. If you
want to switch the function off enter the fac-
tory-installed code
0000
again.
Notice
Entering the PIN Code
If you have already saved a code, the device
will ask you to provide the old code first
before you can enter a new code.
Notice
Default Access Code
The function is switched off with the factory-
installed access code (
0000
). Change the
access code to switch on the function. If you
want to switch the function off enter the fac-
tory-installed code
0000
again.
Notice
Entering the PIN Code
If you have already saved a code, the device
will ask you to provide the old code first
before you can enter a new code.