Panasonic DMC-F2 - Manual (Page 96)

Connecting to other equipment
- -
Connecting to a PC
You can acquire recorded pictures to a PC by connecting the camera and the PC.
• You can easily print out or mail the pictures you have imported. Use of the
“PHOTOfunSTUDIO” bundled software on the CD-ROM (supplied) is a convenient way
of doing this.
• Read the separate operating instructions for the supplied software for more information
about the software in the CD-ROM (supplied) and how to install it.
Preparations:
Turn on the camera and the PC.
Remove the card before using the pictures in the built-in memory.
1 Connect the camera to a PC via the USB connection cable A (supplied).
• Do not use any other USB connection cables except the supplied one.
A
B
AV OUT
DIGITAL
A
USB connection cable (supplied)
• Check the directions of the connectors, and plug them straight in or unplug them straight
out. (Otherwise the connectors may be bent out of shape which will cause trouble.)
B
Align the marks, and insert.
• Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler
(optional). If the remaining battery power becomes low while the camera and the PC are
communicating, the alarm beeps.
Refer to “Disconnecting the USB connection cable safely” (P 98 ) before disconnecting
the USB connection cable. Otherwise, data may be destroyed.