Panasonic DMC-F2 - Manual (Page 31)

Basic
- 1 -
About the flash
• When [q] is selected, [w], [e] or [r] is set depending on the type of subject
and brightness.
• When [e] or [r] is set, the flash is activated twice.
Settings in AUTO Scene mode
Only the following functions can be set in this mode.
[REC] menu
– [PICTURE SIZE]  (P 70 )/[BURST] (P 76 )/[COLOR MODE]  (P 77 )
 The settings which can be set are different from when other recording modes are used.
[SETUP] menu
– [CLOCK SET]/[WORLD TIME]/[BEEP]/[LANGUAGE]
The settings of the following items are fixed.
Item Settings
[POWER SAVE] (P 26 ) [5MIN.]
[AUTO REVIEW] (P 26 ) [2SEC.]
[FLASH] (P 44 ) q /o
[QUALITY] (P 71 ) h
[SENSITIVITY] (P 71 ) [i.AUTO]
[WHITE BALANCE] (P 72 ) [AWB]
[AF MODE] (P 74 ) [3] (Set to [\] when a face cannot be
detected)
[AF ASSIST LAMP] (P 78 ) [ON]
Self-timer (P 50 ) [10SEC.]/[OFF]
• The following functions cannot be used.
– Compensating exposure/[DIGITAL ZOOM]
• The other items on the [SETUP] menu can be set in a mode such as the Normal Picture
Mode. What is set will be reflected in the Auto Scene Mode.