Paradyne Hotwire 6342 - Manual (Page 90)

A. Command Line Interface
A-24 May 2001 6371-A2-GB20-20
show statistics [ eth1 | dsl1 | ip | bridge ]
(Continued from previous page.)
show statistics ip
The following statistics are displayed for show statistics ip :
ip statistics:
Total Packets Received nnnn
Total Packets Transmitted nnnn
Total Packets Discarded nnnn
Zero valued discards are not shown
Refer to Table 5-3, Reasons for IP Processing Discarded Packets, in Chapter 5,
Monitoring the DSL Router, for additional information.
show statistics bridge
The following statistics are displayed for show statistics bridge :
bridge statistics:
Total Bytes Received nnnn
Total Bytes Transmitted nnnn
Total Frames Received nnnn
Total Frames Transmitted nnnn
Broadcasts Attempted to Broadcast nnnn
Non-brdcasts Attempted to Broadcast nnnn
Filtering Database Entries Aged nnnn
Frame Received While Database Full nnnn
Topology Changes nnnn
Forward Transitions nnnn
Bridge PDUs Received nnnn
Bridge PDUs Sent nnnn
Total Frames Discarded nnnn
Zero valued discards are not shown
Refer to Reasons for Bridge Discarded Frames in Chapter 5, Monitoring the DSL Router,
for additional information.
show syslog
Minimum Access Level: Operator
Command Mode: Standard
Shows whether the current status of system as enabled or disabled. The severity level,
management IP address, and UDP port are displayed.
syslog {enabled | disabled}
level {emer | err | norm | info}
management ip-addr x.x.x.x
port nnn