Paradyne Hotwire 6342 - Manual (Page 43)

4. DSL Router Configuration Examples
6371-A2-GB20-20 May 2001 4-7
NOTES:
— The NAPT address does not have to be the same IP address as the DSL
interface.
— The ip routing enable command is only required when using
firmware version 4.2.5 or higher.
— FUNI/MPOA (1483 routed) link encapsulation can be used with this
configuration and the DSL card Models 8304, 8314, 8344, and 8374. Link
encapsulation is configured on the DSL port. This link encapsulation must
match the core network encapsulation type.