Paradyne Hotwire 6342 - Manual (Page 79)

A. Command Line Interface
6371-A2-GB20-20 May 2001 A-13
nat basic delete private-ip
nat basic delete lower-private-ip upper-private-ip
Minimum Access Level: Administrator
Command Mode: Config
In the first command, the command deletes static mapping entry associated with the
specified one-to-one mapping of Basic NAT. In the second command, a range of
mappings will be contiguously deleted starting at the pair defined by the lower-private-ip
and ending with the upper-private-ip argument.
Example: nat basic delete 192.128.1.1
private-ip – Statically mapped IP address of the local host.
lower-private-ip – Lowermost IP address of a range of local host IP addresses which are
to be deleted.
upper-private-ip – Uppermost IP address of a range of local IP addresses which are to
be deleted.
nat napt delete { udp | tcp } port
Minimum Access Level: Administrator
Command Mode: Config
Deletes static mapping entries which identify a local server.
Example: nat napt delete tcp 102
udp, tcp – Specify the protocol used, User Datagram Protocol or Transmission Control
Protocol.
port – The protocol port number associated with the local server.
nat disable
Minimum Access Level: Administrator
Command Mode: Config
Disables the currently enabled Basic NAT, NAPT, or both Basic NAT and NAPT.
nat purge
Minimum Access Level: Administrator
Command Mode: Config
Purges all mapping entries.