Command line interface, Command line interface capability, Navigating the router’s cli – Paradyne Hotwire 6342 User Manual
Page 67: A command line interface, Appendix a, command line interface, Appendix a, command line, Interface, Appendix a
6371-A2-GB20-20
May 2001
A-1
A
Command Line Interface
Command Line Interface Capability
The Hotwire DSL router is managed with text commands from the Command Line
Interface (CLI). The CLI can be accessed:
T
Locally with an ASCII terminal connected to the Console port, or
T
Remotely via a Telnet session.
The CLI is ASCII character-based and provides the capability to:
T
Display the syntax of commands.
T
Change the operational characteristics of the router by setting configuration
values.
T
Restore all configuration values to the initial factory default settings.
T
Display the router’s hardware and identification information.
T
Display system status, including DSL link and Ethernet status.
T
Display a sequence of commands that will set all configurable parameters to
their current value.
Appendix B, Configuration Defaults and Command Line Shortcuts
.
Navigating the Router’s CLI
The Hotwire DSL router’s CLI uses the following keys (as do most terminal
emulation programs):
T
Enter or Return – Accepts the input.
T
Ctrl-c – Aborts the entry or clears the input line.
T
Down Arrow – Repeats an entry within the last five entries made.
T
Up Arrow – Displays the last entry.
T
Left Arrow – Moves the insertion point one space to the left.
T
Right Arrow – Moves the insertion point one space to the right.