Show interface {eth1 | dsl1 – Paradyne Hotwire 6342 User Manual
Page 86
A. Command Line Interface
A-20
May
2001
6371-A2-GB20-20
show dhcp server
Minimum Access Level: Operator
Command Mode: Standard
Displays the DHCP relay’s current status and configuration.
Sample
show dhcp server
display:
DHCP server
{
enabled
|
disabled
}
DHCP server
–
router ip-addr:
x.x.x.x
DHCP server
–
name: domain name.com
DHCP server
–
nameserver ip-addr:
x.x.x.x
DHCP server
–
address range:
lower ip-addr
x.x.x.x
upper ip-addr
x.x.x.x
DHCP server
–
subnet mask:
x.x.x.x
DHCP server
–
leasetime:
minimum
xxxx minutes
maximum
xxxx minutes
DHCP server bindings:
ip-addr MAC addr Leasetime (min.)
x.x.x.x xx:xx:xx:xx:xx:xx nnnn
show interface
{
eth1
|
dsl1
}
Minimum Access Level: Operator
Command Mode: Standard
Displays interface status for the specified interface, eth1 or dsl1.
eth1 – Ethernet interface status.
dsl1 – DSL interface status.
Status information displayed for
show interface eth1
:
Ethernet Link: {up
|
down}
(This is the same status as the Ethernet LED.)
MAC address:
xx:xx:xx:xx:xx:xx
proxy ARP eth1 {enabled
|
disabled}
ifn eth1:1
–
ip-addr
x.x.x.x mask x.x.x.x
1
ifn eth1:2
–
ip-addr
x.x.x.x mask x.x.x.x
ifn eth1:3
–
ip-addr
x.x.x.x mask x.x.x.x
ifn eth1:4
–
ip-addr
x.x.x.x mask x.x.x.x
Status information displayed for
show interface dsl1
:
DSL Link:
{up
|
down}
(This is the same status as the DSL LED.)
MAC address:
xx:xx:xx:xx:xx:xx
proxy ARP dsl1 {enabled
|
disabled}
ifn dsl1:1
–
ip-addr
x.x.x.x mask x.x.x.x
1,2
ifn dsl1:2
–
ip-addr
x.x.x.x mask x.x.x.x
ifn dsl1:3
–
ip-addr
x.x.x.x mask x.x.x.x
ifn dsl1:4
–
ip-addr
x.x.x.x mask x.x.x.x
1
The Primary designation of a numbered interface marks that interface as the one
whose IP address is used as a Router ID. If no interface is defined as Primary, the
last numbered interface created becomes the Primary IP Address.
2
For an unnumbered DSL interface,
dsl1 unnumbered
appears instead of
ifn dsl1
.