PSC PT Program Generator - Manual (Page 138)

PPG Tutorial
126
PT Program Generator (PPG) v5.0
Want a Break?
If you are ready for a break, you can easily stop here. You have not made any
changes that need saving, so you won’t lose any work if you exit PPG or turn
off your computer.
Loading and Using the Program
Now that your program is tested and complete, it's time to load it into the
portable and try it out.
Loading the Program onto the Portable
Complete the following steps to load the program onto the portable:
1. If the cable is not already connected to your portable and the PC,
connect it now.
2. Turn the portable on.
3. In the PPG window, select File > Download Program . (If you are
prompted to save your changes, answer Yes .)
• The PSC Portable Compiler window appears while PPG compiles
the program.
• When compiling is complete, the PSC Portable Programmer
window displays the message Initiating Download . If the
connection is successful, the program is loaded into the portable.
• When downloading is complete, the message Portable
successfully programmed appears in the PSC Portable
Programmer window, and the program's Main Menu is displayed
on the portable’s screen.
If you have problems, refer to Downloading the Program to the Portable on page 172
Using the Program on the Portable
Complete the following steps to run the application you just downloaded to
the portable:
2342.book Page 126 Thursday, July 22, 2004 8:35 AM