Polycom SpectraLink 1725-36165-001 - Manual (Page 17)

Getting Started with Your SpectraLink 8020/8030 Wireless Telephone
1725-36165-001-G.doc 17
Softkey Name Displayed during… Press to…
OK OK Power up registration if
username is not configured
in admin menu. Send the username and password to
the SIP server for authorization to
register the handset.
Redl Redial Prior to entering the first
character of a dial number. Redial the last number that was
dialed.
Rej Reject Incoming call on the selected
line. Reject the incoming call. The SIP
server will then redirect the call
elsewhere, such as voicemail.
Resm Resume In an active call and you
have placed the call on hold,
or in standby mode if any call
is on hold. Resume a call that was previously
placed on hold or that went on hold
when another line was activated.
Save Save Entering a dial number as a
call forwarding destination. Save the dial number as the call
forwarding destination for the
selected line.
Symb Symbols Entering a username or
password.
Entering the digits of a
number.
Select the set of symbols available
on the keypad while entering data.
NavOK Functions
The NavOK key acts as a fifth softkey with implicit functionality as
follows:
State NavOK key function
Dialing Place a phone call.
Answering Answer a phone call
Holding Resume audio.
Displaying menu Select the highlighted menu option.
Displaying call status Connect audio on the currently selected call and place any previous call on
hold.
Entering login name
or login password
Save name or password and proceed with startup.