Printronix SL5000r MP - Manual (Page 67)

Selecting The Tools
67
Selecting The Tools
1. Press until QUICK SETUP displays.
2. If necessary, press ↓ and ↵ at the same time to unlock the
↵ key.
3. Press
↓ until SMT: Sel Toolset displays.
4. Press
↓ until Toolset [1] (PGL emulation 64 bit), Toolset [2]
(PPI/ZGL emulation 64 bit), Toolset [3] (PGL emulation 96 bit),
or Toolset [4] (PPI/ZGL emulation 96 bit) displays.
5. Press ↵ to select it.
6. Press ↓ until SMT: Select Tool displays.
7. Press ↓ until the desired tool displays.
8. Press ↵ to select it.
9. Press ↓ and ↵ at the same time to lock the ↵ key, then press
PAUSE to take the printer offline.
10. Press PAUSE again to put the printer online.
..
.