Printronix SL5000r MP - Manual (Page 62)

Chapter 2 RFID PPI/ZGL Commands
62
^WT0^FH^FD_87_D0_03_45_67_AB_CD_EF^FS
//Write Tag with data = “87D0034567ABCDEF”
//(hex format).
^RT1,0,1,1^FS
//Read Tag into data element 1, 8–byte (16 characters)
//long (hex format).
^FO100,100^A0N,60^FN1^FS
//Print data in element 1.
^XZ
//End and print label.
Example 2
Same as Example 1, except an alternative PPI/ZGL
syntax that does not require underscores between the
hex characters is used.
^XA
//Begin ZPL form.
^WT0,,,,1FDN^FD87D0034567ABCDEF^FS
//Write Tag with data = “87D0034567ABCDEF”
//(hex format).
^RT1,0,1,1^FS
//Read Tag into data element 1, 8–byte (16 characters)
//long (hex format).
^FO100,100^A0N,60^FN1^FS
//Print data in element 1.
^XZ
//End and print label.
Example 3
This example uses the ^RF command to write and read
the tag.
^XA
//Begin ZPL form.
^RFW,H,0^FD31323334^FS
//Write tag data 31323334 in hex.
^FO100,100^A0N,60,60^FN1^FS
//Print tag data in FN1.