Paradyne 7510 DSU - Manual (Page 18)

Using the Asynchronous Terminal Interface
2-8 7510-A2-GB20-10 November 1997
Ending an ATI Session
Use the Exit function key from any screen to terminate the session.
"
Procedure
To end an ATI session:
1. Press Ctrl-a to go to the screen function key area below the dotted line.
2. Save changes if required. A confirmation message appears if you have made
but not saved changes to your configuration.
3. Tab to Exit (or type e or E) and press Return. The User Interface Idle screen
appears.