Switching to the screen function key area, Procedure – Paradyne 7510 DSU User Manual

Page 17

Using the Asynchronous Terminal Interface

2-7

7510-A2-GB20-10

November 1997

Switching to the Screen Function Key Area

Selecting Ctrl-a allows you to switch between the two screen work areas to
perform all screen functions.

Procedure

To access the screen function area below the dotted line:

1. Press Ctrl-a to switch from the screen area to the screen function key area

below the dotted line. The available selections for the first input field appear
on the last line as shown below.

2. Select either the function’s designated (underlined) character or press the tab

key until you reach the desired function key.

Example:
To reset the Monitor 511 error counter to zero, type r or R (ResetMon).

3. Press Return. The function is performed.

4. To return to the screen area above the dotted line, press Ctrl-a again.

ООООООООООООООООООООООООО

main/test/network

Device Name:

Model: 7510

NETWORK TESTS

Test Command Status Result

CSU Loopback:

Start

Inactive

0:00:00

DSU Loopback:

Start

Inactive

0:00:00

Send V.54 Up:

Send

Sending

Send V.54 Down:

Send

Inactive

Send 511:

Start

Inactive

0:00:00

Monitor 511:

Stop

Active

125:08:48

Errors 99999+

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Ctrl-a to access these functions, ESC for previous menu

MainMenu

Exit

ResetMon