Panasonic DPMC210 - Manual (Page 67)

9. Programmable Features
67
9.4 Copy features
Feature/Code Selection
Setting the paper input tray to
use for copy
{#}{
4}{6}{0}
This feature will be displayed only when the optional input tray is installed.
{
1} “ #1” (default): Standard input tray
{ 2} “ #2”: Optional input tray
{ 3} “ #1+#2”
Note:
L If you select “ #1+#2”, make sure the same paper size is selected for the
following:
–
Standard input tray (feature #380 on page 61)
– Optional input tray (feature #382 on page 61)
If either is changed, “ #1” will be selected automatically.
Changing the default copy
resolution
{#}{
4}{6}{1}
To change the default resolution setting for copying.
{
1} “ Text/Photo” (default): For documents containing both text and
photographs.
{
2} “ Text”: For documents containing only text.
{ 3} “ Photo”: For documents containing photographs, shaded drawings, etc.
Holding the previous page
layout setting
{#}{
4}{6}{7}
{ 0} “ Disabled” (default): Deactivates this feature.
{ 1} “ Enabled”: The unit will hold the previous setting.
Holding the previous zoom
setting
{#}{
4}{6}{8}
{ 0} “ Disabled” (default): Deactivates this feature.
{ 1} “ Enabled”: The unit will hold the previous setting.
Holding the previous collate
setting
{#}{
4}{6}{9}
{ 0} “ Disabled” (default): Deactivates this feature.
{ 1} “ Enabled”: The unit will hold the previous setting.
Holding the previous duplex
setting
{#}{
4}{7}{0}
This feature will be displayed only when the automatic duplex unit is installed.
{
0} “ Disabled” (default): Deactivates this feature.
{ 1} “ Enabled”: The unit will hold the previous setting.