Panasonic DPMC210 - Manual (Page 60)

9. Programmable Features
60
9.2 Basic features
Feature/Code Selection
Setting the date and time
{#}{
1}{0}{1}
Enter the date and time using the dial keypad. See page 22 for details.
Setting your logo
{#}{
1}{0}{2}
Enter your logo using the dial keypad. See page 23 for details.
Setting your fax number
{#}{
1}{0}{3}
Enter your fax number using the dial keypad. See page 23 for details.
Selecting the language
{#}{
1}{1}{0}
The display and reports will be in the selected language.
{
1} “ English” (default): English is used.
{ 2} “ Spanish”: Spanish is used.
1. {Menu} i {#}{1}{1}{0}
2. Press {1} or {2} to select the desired language. i {Set} i {Menu}
Setting the dialing mode
{#}{
1}{2}{0}
{ 1} “ Pulse”
{ 2} “ Tone” (default)
See page 19 for details.
Setting flash time
{#}{
1}{2}{1}
The flash time depends on your telephone exchange or host PBX.
{
0} “ 900ms”
{ 1} “ 700ms” (default)
{ 2} “ 600ms”
{ 3} “ 400ms”
{ 4} “ 300ms”
{ 5} “ 250ms”
{ 6} “ 200ms”
{ 7} “ 160ms”
{ 8} “ 110ms”
{ 9} “ 100ms”
{*} “ 90ms”
{#} “ 80ms”
Note:
L If the unit is connected via a PBX, PBX functions (transferring a call, etc.)
might not work correctly. Consult your PBX supplier for the correct setting.
Changing the password for
feature programming via
remote operation
{#}{
1}{5}{5}
1. {Menu} i {#}{1}{5}{5} i {Set}
2. Enter the current password. i {Set}
L The default password is “ 1234”.
3. Enter a new 4-digit password using 0–9. i {Set}
4. Enter the new password again. i {Set} i {Menu}
Note:
L It is recommended that you change this password from the default
password.
L This password is also used for feature programming via a web browser.