Paradyne 6371 User Manual
Page 97
A. Command Line Interface
6300-A2-GB20-00
March 2002
A-25
show dhcp relay
Minimum Access Level: Operator
Command Mode: Standard
Displays the DHCP relay agent’s current status and configuration.
Sample
show dhcp relay
display:
DHCP relay
– {
enabled
|
disabled
}
DHCP relay
–
server ip-addr:
x.x.x.x
Maximum number of DHCP relay clients:
xxx
show dhcp server
Minimum Access Level: Operator
Command Mode: Standard
Displays the DHCP relay’s current status and configuration.
Sample
show dhcp server
display:
DHCP server
{
enabled
|
disabled
}
DHCP server
–
router ip-addr:
x.x.x.x
DHCP server
–
name: domain name.com
DHCP server
–
nameserver ip-addr:
x.x.x.x
DHCP server
–
address range:lower ip-addr
x.x.x.x
upper ip-addr
x.x.x.x
DHCP server
–
subnet mask:
x.x.x.x
DHCP server
–
leasetime:minimum
xxxx
minutes
maximum
xxxx
minutes
DHCP server bindings:
ip-addr MAC addr Leasetime (min.)
x.x.x.x xx:xx:xx:xx:xx:xx nnnn
Table A-17. Show Commands (3 of 10)