Paradyne 6371 - Manual (Page 141)

Index
6300-A2-GB20-00 March 2002 IN-5
shortcuts for command line, B-3
show
alarms, 6-1
arp command, 3-6
bridge, A-24
commands, A-23
console, A-24
DHCP relays and servers, A-25
interface, 5-3
NAT basic and NAPT configurations, A-27
PPPoE, A-28
PPPoE configuration, A-28
spanning-tree topology, A-28
statistics, 5-3
system log and system information, 6-2, A-31
traps, A-32
show commands for
interface status, 5-3
statistics, 5-3
Simple Network Management Protocol (SNMP), C-1
agent overview, C-1
simultaneous NAT and NAPT, 4-8
SNAP encapsulation, 3-2
spanning-tree
show command, A-28
standard
MIBs, C-3
mode, 3-6, 3-13
static mapping, 3-7
statistics
bridge, A-30
clearing, 5-3, A-22
DSL, A-30
Ethernet, A-29
IP processing, A-30
performance, 5-3
PPP, A-31
PPPoE, A-31
show, 5-3
TFTP, A-31
status
interfaces, 5-3
LED, 5-2
syntax, conventions used in commands, A-2
syslog, 6-1–6-2
enable, 6-2
events, 6-4
IP address, 6-3
message display, 6-5
show command, 6-2, A-31
system
ID, A-32
identity, 2-3, 2-6
log, 6-1–6-2
T
Telnet
commands, A-20
Telnet access, 2-1, 2-4
terminal emulation
settings, D-1
test
Ping results, 6-6
TFTP
statistics, A-31
timeout
show ARP, A-23
topology, show spanning-tree, A-28
TraceRoute, 6-7
Transmission Control Protocol (TCP), A-12–A-13
traps, C-2
show command, A-32
troubleshooting, 6-1
U
unnumbered DSL interface
IP address, A-6
network configuration, 4-10
scenario, 3-3
upstream static route, creating or deleting, A-8
User Datagram Protocol (UDP), A-12–A-13
user login, 2-3
V
Virtual Circuit (VC) multiplexing, A-5
VNET mode, 3-6, 3-13