Paradyne 6371 - Manual (Page 110)

B. Configuration Defaults and Command Line Shortcuts
B-6 March 2002 6300-A2-GB20-00
show log [ number of entries ]
show nat {basic | napt}
show pppoe
show spanning-tree
show statistics [ dsl1 | eth1 | ip | bridge | pppoe| tftp]
show syslog
show system
show telnet
spanning-tree { enable | disable }
syslog { enable | disable }
syslog ip ip-addr [ mgt | srvc]
syslog level {emer | err | norm | info | debug }
syslog port port
system identity identity
telnet {enable | disable }
telnet keep-alive {enable | disable }
telnet keep-alive interval [ time ]
telnet keep-alive timeout [ time ]
telnet login { enable | disable }
telnet name create {admin | operator} login-id password
telnet name delete { admin | operator } login-id
telnet timeout [ time ]
traceroute dest-ip [-x source-ip ] [-l bytes ] -w time ] [ -h hops ] [ -i {eth1 | dsl1} ]
trap {enable | disable } name of trap
Table B-2. Command Line Shortcuts (4 of 4)
Command