Lan/snmp – Polycom Viewstation MP User Manual

Page 93

System Information

ViewStation User’s Guide

LAN/SNMP

The LAN/SNMP screen contains information that is of interest to the system
administrator. This information enables the network to identify your
ViewStation.

LAN/Intranet

The LAN/Intranet screen is where you would change the DHCP setting for your
ViewStation. If it is connected to a LAN, then Client should be selected in the
DHCP field (if DHCP is available). If you are connecting the ViewStation
directly to a PC that isn’t on a network, then Server should be selected in the
DHCP field. See the Connecting a PC section of this manual for details.

CAUTION:

Do not select Server if your ViewStation is on a LAN with

other computers. If you do, the ViewStation will provide

IP addresses to the other computers even though the LAN

already has a DHCP server. Your IT personnel and

system administrators will have to repair any network

problems this causes.

This manual is related to the following products:

Viewstation 512