Far-end loop – Polycom Viewstation MP User Manual
Page 120
ViewStation 512/MP
120
ViewStation User’s Guide
Far-End Loop
The Far-End Loop screen allows you to find out whether or not your audio and
video is going out and coming back properly. However, this only works while
you are in a call. To stop the loop, press any button on the remote. Then
highlight the Menu icon to return to the Diagnostics screen.
Reset System
The Reset System screen is used to clear existing system configurations.
Resetting the system erases your admin password and all user settings except
your address book entries. Before you can reset your system, however, you must
enter the serial number of your ViewStation. This prevents the casual user from
performing an unintentional reset. You can find the serial number on the System
Info screen.