Polycom Viewstation MP User Manual
Page 78
Data Conferencing
78
ViewStation User’s Guide
4.
From the main calling screen, go to the System Info
➢Setup➢Data
Conferencing screen.
5.
Enter the name of the ShowStation and return to the main calling screen by
pressing the CALL•HANG-UP button on the remote.
6.
Place a video call between the two ViewStations. If you do not know how
to place a video call, see the Placing and Answering Calls section of this
manual.
7.
When the ViewStations connect, the ShowStations will synchronize with
one another automatically. Once they connect, a whiteboard will appear on
the ShowStations’ LCD displays. It will take approximately 30 seconds for
the whiteboard to appear once the video call is placed. You are now ready
to use your ShowStation.
This manual is related to the following products: