Polycom Viewstation MP - Manual (Page 85)

ViewStation User’s Guide 85
You can find out everything about your ViewStation by selecting the System
Info icon on the main calling screen. If you want to find out more, highlight the
Setup & Diagnostics icon and press the SELECT button on the remote.
ViewStation Diagnostics
To run diagnostics from your PC, see the Remote Management section for
details. Follow these steps to run them from the ViewStation.
1. From the main calling screen, use the arrow buttons on the remote to go to
the System Info
➢Setup & Diagnostics➢Diagnostics screen. From here,
you can check the status of your network, the rate of your video signal, the
status of an existing video call, the color contrast on your monitor, the
sound coming from your ViewStation, the near-end loop, far-end loop, and
reset your system.
2. Highlight the appropriate icons to find out the details about a specific
function of your ViewStation.
System Information