Philips Power Connected MessageSmartcard Internet Terminal MAT972KB QUG - Manual (Page 23)

23
Connections
If you want to place the Internet Terminal in a cabinet, or somewhere out of
view, use the webeye. Then, point the remote control at the webeye (not the
Internet Terminal) in order to control the Internet Terminal.
Connect the webeye cord to the webeye jack on the back of the Internet
Terminal. Then, place the webeye in a convenient location, such as on top of the
entertainment center.
Go to step 6 - Connecting the AC Power Cord.
Make sure your local AC voltage cor-
responds to the voltage of the AC
power cord (120V) before connecting
the Internet Terminal to AC power. If
it does not, consult your dealer.
Then, connect one end of the AC
power cord to the Internet
Terminal’s AC Input jack. Connect
the other end (two-prong plug end)
to an AC outlet.
Make sure all other equipment
(Cable Box, VCR, etc.) is plugged in.
You are ready to connect to the
WebTV Network. Instructions
are on page 25.
AC Input
In
Out
Cable
Channel
3 4
S-Video
w e b e y e
Step 6 Connecting the AC Power Cord
Step 5 Connecting the webeye
AC Input
In
Out
Cable
Channel
3 4
S-Video
w e b e y e
Out
In
R L
Audio Video
Printer Port Phone Mic IR Blaster