Philips Power Connected MessageSmartcard Internet Terminal MAT972KB QUG - Manual (Page 12)

12
Front Panel
Getting Started
1 Smartcard port
Allows you to use Smartcard technology when it becomes available. Accessories may be
required. Additional information will be available from the WebTV Network when features
are available.
2 Power indicator
Indicates the Internet Terminal power is on.
3 Connected indicator
This indicator flashes when the Internet Terminal is connecting to the WebTV Network. It
remains lit while the terminal is in use. It also may flash when you try a different feature or
move among sites.
4 Message indicator
Indicates that you have a new email message.
5 Infrared sensor
Allows you to operate your Internet Terminal with the remote control. When you are not
using the webeye, point the remote control at the Internet Terminal. If you are using the
webeye, point the remote control at the webeye.
6 Expansion Port (on the side of the unit)
Allows you to use optional accessories that will be introduced in the future. The port
should remain closed when you are connected to the WebTV Network.
Additional information will be available from the WebTV Network when features are avail-
able.
webtv
Power Connected Message Smartcard
6 5 4 3 2 1