Printronix L1524 - Manual (Page 16)

1–6 Introduction
Hardware Options
Ask your printer representative about these options which can enhance your
printer’s versatility:
•
Paper stacker with printer stand
The paper stacker provides for properly stacked paper from the beginning to
completion of the print job. The stacker will hold an entire box of media.
•
Memory expansion (32 meg and 64 meg)
The L1524 has 32 meg of memory factory installed.
•
Flash memory which may store configurations in NVRAM, emulations,
fonts and logos.
The L1524 has 8MB of flash memory in its base configuration. 16, 32, or 64MB
modules are also available.
•
PrintNet Ethernet LAN connection
A hardware option is available for proper connection of the printer to a LAN. This
option is sometimes referred to as the NIC (Network Interface Card).
•
Coax/Twinax connection
A hardware option is available for proper connection of the printer for
Coax/Twinax operation.
•
Optional fonts
Optional printer fonts can be purchased and downloaded into the printer using a
diskette.
Fonts and Forms
The printer provides a variety of resident fonts. The available fonts are dependent
the emulation used. For example, the Printronix LinePrinter Plus emulation
provides Letter Gothic, Courier, OCR-A, and OCR-B as standard fonts sets.
Additional fonts can be downloaded from the host computer into printer memory.
Once loaded, these additional fonts are accessed in the same way as the
resident fonts.
Forms may be stored together with fonts. The storage space for forms and fonts
depends on memory availability. Different fonts and forms may be used
depending on the emulation installed.