Direct command chart/programming index – Panasonic KX-TH112 User Manual
Page 87
Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp
87
Direct command chart/programming index
Important:
L
You can program each feature directly by using feature codes.
Press {MENU}, {#}, then press the desired feature code.
Note:
L
When you find “*1”, “*2”, and “*3” in the following table, refer to the corresponding note
below.
*1 If you program the following features using one of the units, you do not need to program
the same item using another unit.
*2 If you reset the base unit (page 47), the marked features are reset to their default
settings (base unit only).
*3 If you have not registered your cellular phone and/or headset to the base unit, the
marked features cannot be programmed.
Telephone
Feature
Feature
code
Operating
unit
Default setting
Page
Auto edit
*2
(Caller ID number auto edit)
{
2}{1}{4}
Y
^
On
45
Auto talk
{
2}{0}{0}
Y
Off
45
Caller list
{
2}{1}{3}
Y
^
–
32
Customer support
{
6}{8}{0}
Y
^
–
48
Customize ring
{
1}{6}{6}
Y
–
42
Date and time
*1
{
1}{0}{1}
Y
^
12.31.2006
20
Deregistration
(Deregistering a handset)
{
1}{3}{1}
Y
–
49
Deregistration
(Deregistering another device)
{
1}{3}{4}
^
–
49
Display
*2
(Display language)
{
1}{1}{0}
Y
^
English
19
Registration
(Handset
registration)
{
1}{3}{0}
Y
–
48
Interrupt tone
*2
{
2}{0}{1}
Y
^
2
43
Key tone
{
1}{6}{5}
Y
On
45
LCD contrast
*2
(Display contrast)
{
1}{4}{5}
Y
^
Level 3
45
Line select
*2
{
2}{5}{0}
Y
^
Auto
46
Message alert
{
3}{4}{0}
Y
Off
58
TH112(e).book Page 87 Tuesday, July 18, 2006 3:54 PM