Panasonic KX-TH112 - Manual (Page 40)

F Monitoring
40 For assistance, please visit http://www.panasonic.com/phonehelp
Monitoring feature
This feature allows you to monitor the
room where a unit is located. The
monitored unit does not ring, allowing you
to easily monitor a baby’s room, for
example, from different areas of the
house.
Enabling monitoring access
Y ^
To use the monitoring feature, you need to
set the destination unit to be monitored
beforehand.
– “Permit”: allows the unit to be
monitored.
– “Deny”: denies access from other units.
1
{
MENU} (center of joystick) i h i
{ SELECT}
2
“Monitor access” i {SELECT}
3
Select the desired setting. (Default:
“Deny”) i {SAVE} i {OFF}
1
{
MENU} i h i {SET}
2
“Monitor access” i {SET}
3
Select the desired setting. (Default:
“Deny”) i {SET} i {STOP}
Audio monitor
This feature allows you to listen to the
audio in a room where the handset or base
unit is located.
Monitoring audio in a room
Y ^
1
{
MENU} (center of joystick) i F
i {SELECT}
2
Select the desired unit. i {SELECT}
L
You can listen to the audio.
3
Press {OFF} to stop monitoring.
1
{ MENU} i F i {SET}
2
Select the desired unit. i {SET}
L
You can listen to the audio.
3
Press {SP-PHONE} to stop monitoring.
Note for handset and base unit:
L To start monitoring quickly, press
{
INTERCOM}, then press {*} instead
of step 1.
Handset
Base unit
Before using this feature, allow access
to the destination unit by selecting
“Permit” in the monitor access setting
(page 40).
Handset
Base unit
TH112(e).book Page 40 Tuesday, July 18, 2006 3:54 PM