Panasonic KX-TH112 - Manual (Page 33)

G Caller ID Service
For assistance, please visit http://www.panasonic.com/phonehelp 33
Note:
L If the indicated line is already being used
or you want to select the other line,
select the desired line by pressing
{
LINE1} or {LINE2}.
Displayed symbols
L m
and n indicate which line the caller
information was received from.
L
If the same caller calls more than once, it
is displayed with the number of times the
caller called (“×2” to “×9”). Only the date
and time of the most recent call is
stored.
L
A Q is displayed next to items which
have already been viewed or answered.
Editing a caller’s phone number
before calling back
Y ^
You can edit a phone number in the caller
list by removing its area code and/or the
long distance code “1”.
1
{ MENU} (center of joystick) i G
i {SELECT}
2
Select the desired item.
3
Press {EDIT} repeatedly until the
phone number is shown in the desired
format.
1 Local phone number
2 Area code – Local phone number
3 1 – Area code – Local phone
number
4
{C}
1
{
MENU} i G i {SET}
2
Select the desired item.
3
Press {EDIT} repeatedly until the
phone number is shown in the desired
format.
1 Local phone number
2 Area code – Local phone number
3 1 – Area code – Local phone
number
4
{
SP-PHONE}
Caller ID number auto edit feature
Once you call back an edited number, the
unit will remember the Area Code and
Format of the Edited Number. Next time
when someone calls from the same Area
Code, caller information will be customized
by the unit as follows:
– When the call is being received, the
Caller ID number will be displayed in the
same Format as the Edited Number.
– After the call is ended, the telephone
number of the caller, when reviewed
from the Caller list, will be displayed in
the same Format as the Edited Number.
For example, you can use this feature to
set the unit to ignore the area code of
callers in your area code, so that you can
call these local numbers using caller
information without dialing the area code.
To activate this feature, you must edit an
item in the caller list, then call that number.
After that, phone numbers from that
caller’s area code are edited automatically.
This feature can be turned on or off (page
45). The default setting is “On”.
Handset
Example:
Example:
Example:
321-5555
555-321-5555
1-555-321-5555
Base unit
Example:
Example:
Example:
321-5555
555-321-5555
1-555-321-5555
TH112(e).book Page 33 Tuesday, July 18, 2006 3:54 PM