Panasonic KX-TH112 - Manual (Page 65)

Using a Cellular Phone with this Unit
For assistance, please visit http://www.panasonic.com/phonehelp 65
Ringer tone
You can change the ringer tone heard
when a cellular call is received. You can
change it for the handset and base unit
individually.
1
{
MENU} (center of joystick) i f
i {SELECT}
2
“Ringer for cell” i {SELECT}
3
“Ringer tone” i {SELECT}
4
Select the desired item. (Default: “Tone
3
”) i {SAVE} i {OFF}
Note:
L
If you erase a customized ring for
cellular call, “Tone 3” (default) is used
instead of that ringer tone.
1
{
MENU} i f i {SET}
2
“Ringer for cell” i {SET}
3
“Ringer tone” i {SET}
4
Select the desired item. (Default: “Tone
3
”) i {SET} i {STOP}
Selecting which unit to ring ^
You can select which handset or base unit
rings when you receive a call from one of
the registered cellular phones.
1
Press the desired CELLULAR SELECT
button ({1} to {5}).
2
“Assign Base/HS” i {SET}
3
Select the desired unit, then press {>}.
(Default: “All”)
L
The selected units are indicated by
“Q”.
L
To cancel a selected unit, press {>}
again.
4
{
SET} i {STOP}
Answering system settings for
cellular calls ^
Setting the answering system for a
cellular call
This feature allows the base unit to answer
cellular calls when you are not available to
answer cellular calls.
Important:
L
To use this feature, you need to turn on
the answering system for line 1 and/or
line 2 (page 50).
L
If this feature is turned on, the base unit
plays the greeting message for line 1
and message is recorded on line 1.
1
{
MENU} i A i {SET}
2
“TAD for cell” i {SET}
3
“TAD (cell)” i {SET}
4
Select the desired setting. (Default:
“Off”) i {SET} i {STOP}
Note:
L “TAD” stands for Telephone Answering
Device.
Handset
Base unit
TH112(e).book Page 65 Tuesday, July 18, 2006 3:54 PM