beautypg.com

Panasonic KX-TH112 User Manual

Page 75

background image

Useful Information

For assistance, please visit http://www.panasonic.com/phonehelp

75

Making/answering calls, intercom

Problem

Cause/solution

Static is heard, sound
cuts in and out.
Interference from other
electrical units.

L

Move the handset and base unit away from other
electrical appliances (microwave, wireless LAN
appliance, etc.).

L

Move closer to the base unit.

L

Raise the base unit antennas.

L

Turn on the clarity booster feature (page 25).

L

If your base unit is connected to a telephone line with
DSL service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your DSL provider for details.

The handset and base
unit do not ring.

L

The ringer volume is turned off. Adjust it (page 41, 64).

I cannot make a call.

L

The dialing mode may be set incorrectly. Change the
setting (page 20).

L

The base unit (including answering system) or another
handset is in use. Try again later.

I cannot redial by
pressing {REDIAL}.

L

If the last number dialed was more than 48 digits long,
the number will not be redialed correctly. Dial the
number manually.

I cannot have a
conversation using the
headset.

L

Make sure that an optional headset is connected
properly (page 71).

L

If “SP-phone” is displayed on the handset, press {C}
to switch to the headset.

L

Your optional Bluetooth headset is not registered.
Register it (page 70).

I cannot make long
distance calls.

L

Make sure that you have long distance service.

I cannot page the
handset or base unit.

L

The called handset is too far from the base unit.

L

The called unit is in use. Try again later.

I cannot turn the clarity
booster on.

L

The resources available for wireless communication
(making or answering calls with another handset, etc.)
are limited. Wait for the other user to end the operation
and try again.

The interrupt tones sound
while I am on an outside
call or on an intercom call
or monitoring a room.

L

A call is being received. Press {OFF} to end the call or
stop monitoring, then answer the call.

TH112(e).book Page 75 Tuesday, July 18, 2006 3:54 PM