Panasonic KX-TH112 - Manual (Page 66)

Using a Cellular Phone with this Unit
66 For assistance, please visit http://www.panasonic.com/phonehelp
Ring count
You can change the number of times the
cellular phone rings before the base unit
answers cellular calls.
1
{
MENU} i A i {SET}
2
“TAD for cell” i {SET}
3
“TAD ring count” i {SET}
4
Select the desired number. (Default: “4
rings
”) i {SET} i {STOP}
Turning on the discoverable
mode ^
When discoverable mode is turned on, this
unit may be seen by other Bluetooth
devices.
1
{
MENU} i h i {SET}
2
“Bluetooth” i {SET}
3
“Discoverable” i {SET}
4
Select the desired setting. (Default:
“Off”) i {SET} i {STOP}
Transferring a cellular
call
Cellular calls can be transferred between
the handset and the base unit, and
between the handset and another
compatible Panasonic handset (KX-
THA19). You can also switch a cellular call
between a cellular phone and base unit.
Transferring a cellular call
Y ^
1
During a cellular call, press
{
INTERCOM} to put the call on hold.
2
To page the base unit, press {0}.
To page another handset, enter its
extension number ({1} to {8}).
L
If you do not wish to announce the
transfer, skip to step 4.
3
Wait for the paged party to answer.
L
If the paged party does not answer,
press {C} to return to the cellular
call.
4
To complete the transfer, press {OFF}.
1
During a cellular call, press
{
INTERCOM} to put the call on hold.
2
To page a handset, enter its extension
number ({1} to {8}).
To page all handsets, press {0}.
L
If you do not wish to announce the
transfer, skip to step 4.
3
Wait for the paged party to answer.
L
If the paged party does not answer,
press the CELLULAR SELECT
button ({1} to {5}) that is flashing to
return to the cellular call.
Handset
Base unit
TH112(e).book Page 66 Tuesday, July 18, 2006 3:54 PM