Pentax Optio 43WR - Manual (Page 88)

86
7
Printing
4
Use the four-way controller (45) to select either O (On)
or P (Off) for imprinting the date.
O: The date will be imprinted.
P: The date will not be imprinted.
5
Press the OK button.
Prints can be made according to the settings.
• If DPOF settings have already been made for an image, the previously
set number of prints and On/Off date setting will be displayed.
• To cancel DPOF settings, set the number of prints to 00 and press the
OK button.
• DPOF settings cannot be used with moving pictures.
• Depending on the printer or printing equipment at the photo
processing lab, the date may not be imprinted on the pictures even if
the DPOF setting was made.
00_Optio43WR-E.book Page 86 Wednesday, February 25, 2004 1:23 PM