Pentax Optio 43WR - Manual (Page 111)

109
9
Camera Settings
1
Press the MENU button.
2
Press the four-way controller (5).
The [Q Playback] menu will be displayed.
3
Press the four-way controller (23) to select [Alarm].
4
Press the four-way controller (5).
The list of alarms will be displayed.
5
Press the four-way controller (23)
to select alarm 1, 2, or 3.
6
Press the four-way controller (5).
The screen for setting the Alarm mode and
time will be displayed.
7
Press the four-way controller (23)
to select the number of times the
alarm will ring.
Everyday : The alarm will ring everyday at
the set time.
Once : The alarm rings once at the set time.
Off : The alarm will not ring.
8
Press the four-way controller (5).
9
Press the four-way controller (23) to set the time (hour)
the alarm will ring.
10
Repeat steps 8 and 9 above to set the alarm time
(minute) and set S (Snooze) to O (On) or P (Off).
If the Snooze is set to O, the alarm will ring 5 times at 5-minute intervals.
11
Press the Z button.
12
Press the four-way controller (45) to select the image
to be displayed when the alarm rings.
13
Press the OK button.
14
Press the OK button 3 times.
“Alarm was set” is displayed and the camera switches off.
Setting the Alarm
When the camera is turned off and the set time is reached, the alarm will
ring for one minute. After the alarm turns off, the camera will turn off
automatically.
1
OK OK Exit MENU
Alarm
5:30AM
7:30AM
12:00PM
Once
2 Off
3 Off
OK OK Exit MENU
No Image
Image
Alarm
5:30AM Once
1
00_Optio43WR-E.book Page 109 Wednesday, February 25, 2004 1:23 PM