Pentax Optio 43WR - Manual (Page 103)

101
9
Camera Settings
The date and time set in “Initial Settings (p.22)” are the Home Time (your
usual time zone) setting.
Setting World Time enables you to display the local date and time on the
monitor when traveling overseas.
1
Select [World Time] on the [B Set-up] menu.
2
Press the four-way controller (5).
The World Time screen will be displayed.
3
Switch O (On) and P (Off) with the
four-way controller (45).
O
: The time in the country selected in World
Time will be displayed.
P : The time in the country selected in Home Time will be displayed.
4
Press the four-way controller (3).
If New York is selected as the world time city, then the cross-shaped
line is located in New York on the world map, and then X indicates the
current time in New York (NYC).
5
Use the four-way controller (45) to select the World
Time city and press the four-way controller (3).
6
Set the daylight saving time to On (Y) or Off (Z) with the
four-way controller (45).
7
Press the four-way controller (3).
New York (NYC) is selected as the Home Time city [ ] at first.
8
Repeat steps 5 and 6 to change the Home Time city and
Daylight Saving Time setting.
9
Press the OK button twice.
The camera is ready to capture or play back images with the time in
the selected city.
Setting World Time
See the list on p.111 for available cities and their codes.
NYC
NYC
07:18
07:18
World Time
OK OK Exit MENU
09_Optio43WR-E.fm Page 101 Wednesday, February 25, 2004 4:16 PM