beautypg.com

Messages – Pentax Optio 43WR User Manual

Page 114

background image

112

10

Appendix

Messages

The following messages may be displayed on the LCD monitor during

camera operation.

Alarm set

This is displayed when the alarm is set and the camera is
about to be automatically turned off.

Battery depleted

The battery is exhausted.Replace the battery.(p.13)

Camera cannot display
this image

You are trying to play back an image not supported by this
camera.You may be able to display this on a PC or another
brand of camera.

Card locked

The SD Memory Card is write protected. (p.19)

Card not formatted

The SD Memory Card you have inserted is unformatted or
has been formatted on a PC or other device and is not
compatible with the camera.(p.97)

Compression error

Compression of the image you captured has failed.Change
the recorded pixels or quality level, and take a picture again.

Data being recorded

The image/voice recording is being recorded on the SD
Memory Card.

Data error

Displayed when the printer was unable to process the data
in PictBridge mode.

Deleting

An images or sound on the SD Memory Card is being
deleted.

Formatting

The SD Memory Card is being formatted.

Image folder could not
be created

The maximum file number has been used, and no more
images or sound can be saved.Insert a new SD Memory
Card or format the card.(p.16, 97)

Image protected

This is displayed when you try to delete a protected image.

Memory card error

Shooting and playback are impossible due to a problem
with the SD Memory Card.Try displaying it on a PC.

Memory card full

The SD Memory Card memory is full and no more images
or sound can be saved.Insert a new SD Memory Card or
delete unwanted images or sound.(p.16, 79)
You may be able to save the image by changing the quality
level or recorded pixels.(p.40, 41)

No card in camera

An SD Memory Card has not been inserted into the
camera.(p.16)

No image & sound

There are no images or sound saved in the SD Memory
Card that can be played back.

No ink

Displayed when the printer is out of ink in PictBridge mode.

00_Optio43WR-E.book Page 112 Wednesday, February 25, 2004 1:23 PM